50A PWM Solar Charge Controller
Features
1. Automatic identification of 12V/24V system voltage.
2. LED digital display and single key operations which makes operate simply and conveniently.
3. Adopting ternary form charging algorithm, charge the storage battery in equalizing charge mode once a week .It can prevent battery from imbalance and vulcanization effectively, also battery service life will be extended.
4. Five working modes which made it convenient to use in all kinds of street lamps and monitoring devices.
5. It can be used in a variety of environments by Level of industrial design.
6. Has the electricity protection data function .Parameter can be stored when the power system failure. No need to setting again. It is very simple and convenient to use.
7. Various status indications.
8. Over charging protection, over discharging protection, over load, short circuit protection, reverse polarity protection.
9. TVS lightning protection.
| | HP2450 | HP2460 |
| Rated current | 50A | 60A |
| System voltage | Automatic recognition of 12V/24V |
| Rated power | 12V/750W 24V/1500W | 12V/900W 24V/1800W |
| No-load loss | < 13mA/12V;< 15mA/24V |
| Max. Solar energy input voltage | <55 |
| Max. voltage at the battery end | <34V |
| Overvoltage protection | 16.0V |
| Charging recovery voltage | 13.2V |
| Over-discharge recovery voltage | 12.5V(settable with the keys) |
| Over-discharge voltage | 11.0V(settable with the keys) |
| Boost charging time | 2H |
| Temperature compensation | -3.0mV/℃/2V |
| Light control voltage | Light control on 5V, light control off 6 V (light control on plus 1 V) |
| Light control judgment time | 10 minutes |
| USB function | NO |
| Operating temperature | -25℃~+55℃ |
| IP protection degree | IP30 |
| Net weigh | 650g |
| Protection functions | attery reverse connection protection, solar panel reverse connection protection Notice 1, reverse charging protection at night ,Charging overload protection, overcurrent protection , short circuit protection |
| Dimensions | 189.27×127.2×54.0 (mm) |
